Ning-Cheng Lee博士编写了 《Reflow Soldering Processes and Troubleshooting: SMT, BGA, CSP, and Flip Chip Technologies》(Newnes出版)一书,参与编写了《Electronics Manufacturing with Lead-Free, Halogen-Free, and Conductive-Adhesive Materials》(McGraw-Hill出版),同时还编写了一些无铅焊接书籍的部分章节。他于1991年获SMT杂志颁发的最佳SMI国际研讨会论文奖,1993年和 2001年获SMTA颁发的最佳SMTA国际研讨会论文奖,2008年获IPC在美国APEX会议上颁发的优秀论文奖, 2010年获SMTA China South颁发的最佳论文奖,2002年,被提名为SMTA的荣誉会员,2003年获Soldertec全球无铅焊料奖, 2006年获CPMT杰出技术成就奖,2007年CPMT杰出讲师,2009年SMTA杰出作者,2010年获CPMT电子制造技术奖。Ning-Cheng Lee博士还是SMTA董事会成员,并担任《Soldering and Surface Mount Technology》和《Global SMT & Packaging》杂志的编辑顾问,《IEEE Transactions on Electronics Packaging Manufacturing》的助理主编。他发表过大量的文章,经常应邀参加国际论坛研讨会并对一些研究成果做简短的介绍或者重要的演讲。
Ning-Cheng Lee is the Vice President of Technology of Indium Corporation of America. He has been with Indium since 1986. Prior to joining Indium, he was with Morton Chemical and SCM. He has more than 20 years of experience in the development of fluxes and solder pastes for SMT industries. In addition, he also has very extensive experience in the development of underfills and adhesives. He received his PhD in polymer science from University of Akron in 1981, and BS in chemistry from National Taiwan University in 1973.
Ning-Cheng is the author of “Reflow Soldering Processes and Troubleshooting: SMT, BGA, CSP, and Flip Chip Technologies” by Newnes, and co-author of “Electronics Manufacturing with Lead-Free, Halogen-Free, and Conductive-Adhesive Materials” by McGraw-Hill. He is also the author of book chapters for several lead-free soldering books. He received 1991 award from SMT Magazine and 1993 and 2001 awards from SMTA for best proceedings papers of SMI or SMTA international conferences, 2008 award from IPC for Honorable Mention Paper – USA Award of APEX conference, and Best Paper Award of SMTA China South 2010. He was honored as 2002 Member of Distinction from SMTA, 2003 Lead Free Co-Operation Award from Soldertec, 2006 Exceptional Technical Achievement Award from CPMT, 2007 Distinguished Lecturer from CPMT, 2009 Distinguished Author from SMTA, and 2010 Electronics Manufacturing Technology Award from CPMT. He served on the board of governors for CPMT, serves on the SMTA board of directors. Among other editorial responsibilities, he serves as editorial advisory board of Soldering and Surface Mount Technology, Global SMT & Packaging and as associate editor for IEEE Transactions on Electronics Packaging Manufacturing. He has numerous publications and frequently gives presentations, invited to seminars, keynote speeches and short courses worldwide on those subjects at international conferences and symposiums.
课程介绍 评价详情(0)
培训受众:
培训颁发证书:
课程大纲
软钎料焊点可靠性
热疲劳过程中焊点的结构与性能关系以及失效模式,易脆性和提高可靠性的解决方案
电迁移
在无铅,锡铅,铜的支柱,和RDL系统中的基本原理和表现
POP和底部终止封装
工艺的考虑,材料的选择及可靠性
环氧助焊剂 - POP和其他面阵封装中可靠性解决方法
工艺,应用以及与其他替代方案的比较
回流焊过程中气孔的控制
气孔产生机制和控制方法以及在QFN中的应用
培训师介绍
Ning-Cheng Lee博士编写了 《Reflow Soldering Processes and Troubleshooting: SMT, BGA, CSP, and Flip Chip Technologies》(Newnes出版)一书,参与编写了《Electronics Manufacturing with Lead-Free, Halogen-Free, and Conductive-Adhesive Materials》(McGraw-Hill出版),同时还编写了一些无铅焊接书籍的部分章节。他于1991年获SMT杂志颁发的最佳SMI国际研讨会论文奖,1993年和 2001年获SMTA颁发的最佳SMTA国际研讨会论文奖,2008年获IPC在美国APEX会议上颁发的优秀论文奖, 2010年获SMTA China South颁发的最佳论文奖,2002年,被提名为SMTA的荣誉会员,2003年获Soldertec全球无铅焊料奖, 2006年获CPMT杰出技术成就奖,2007年CPMT杰出讲师,2009年SMTA杰出作者,2010年获CPMT电子制造技术奖。Ning-Cheng Lee博士还是SMTA董事会成员,并担任《Soldering and Surface Mount Technology》和《Global SMT & Packaging》杂志的编辑顾问,《IEEE Transactions on Electronics Packaging Manufacturing》的助理主编。他发表过大量的文章,经常应邀参加国际论坛研讨会并对一些研究成果做简短的介绍或者重要的演讲。
Ning-Cheng Lee is the Vice President of Technology of Indium Corporation of America. He has been with Indium since 1986. Prior to joining Indium, he was with Morton Chemical and SCM. He has more than 20 years of experience in the development of fluxes and solder pastes for SMT industries. In addition, he also has very extensive experience in the development of underfills and adhesives. He received his PhD in polymer science from University of Akron in 1981, and BS in chemistry from National Taiwan University in 1973.
Ning-Cheng is the author of “Reflow Soldering Processes and Troubleshooting: SMT, BGA, CSP, and Flip Chip Technologies” by Newnes, and co-author of “Electronics Manufacturing with Lead-Free, Halogen-Free, and Conductive-Adhesive Materials” by McGraw-Hill. He is also the author of book chapters for several lead-free soldering books. He received 1991 award from SMT Magazine and 1993 and 2001 awards from SMTA for best proceedings papers of SMI or SMTA international conferences, 2008 award from IPC for Honorable Mention Paper – USA Award of APEX conference, and Best Paper Award of SMTA China South 2010. He was honored as 2002 Member of Distinction from SMTA, 2003 Lead Free Co-Operation Award from Soldertec, 2006 Exceptional Technical Achievement Award from CPMT, 2007 Distinguished Lecturer from CPMT, 2009 Distinguished Author from SMTA, and 2010 Electronics Manufacturing Technology Award from CPMT. He served on the board of governors for CPMT, serves on the SMTA board of directors. Among other editorial responsibilities, he serves as editorial advisory board of Soldering and Surface Mount Technology, Global SMT & Packaging and as associate editor for IEEE Transactions on Electronics Packaging Manufacturing. He has numerous publications and frequently gives presentations, invited to seminars, keynote speeches and short courses worldwide on those subjects at international conferences and symposiums.
本课程名称: 焊点可靠性,POP组装与空洞控制
查看更多:生产管理公开课