CONTENT Module 1: Introduction to Network Module 2: Networking Fundamentals Module 3: Networking Media Module 4: Cable Testing Module 5: Cabling LANs and WANs Module 7: Ethernet Technologies Module 8: Ethernet Switching Module 9: TCP/IP Protocol Suite and IP Addressing Module 10: Routing Fundamentals and Subnets Module 11: TCP/IP Transport and Application Layer
Part2 CONTENT 1.WAN and Router 2.Introduction to Router 3.Configure a Router 4.Introduction to CDP 5.Managing Cisco IOS software 6.Rouing protocols 7.Distance vector routing protocols. 8.Introduction to ICMP 9.Basic Router Troubleshooting 10.Access Control List
Part3 CONTENT 1.Understand the concept of VLSM 2.RIP Version 2 features and Configuration 3.Single Area OSPF Concepts and Configuration 4.4 EIGRP Concepts and Configuration 5.Troubleshooting Routing Protocols(RIP IGRP EIGRP OSPF) 6.Switching Concepts Half-duplex and Full-duplex networks 7.Switch Operation , Distinguish between collision and broadcast domain 8.Introduce LAN Design 9.Hierarchical design model 10.Switch Configuration 11.Describe the operation of the Spanning-Tree Protoco 12.The concepts and benefits of virtual LANs 13.Config VLAN 14.Troubleshooting VLANs 15.Understand the concepts and configuration VTP 16.Configuring inter-VLAN routing
Part4 CONTENT 1.Scaling Networks with NAT and PAT 2.DHCP operation and Configuration 3. Introduce WAN Technologies 4.WAN Design 5.Identify PPP operations to encapsulate WAN data on Cisco routers. 6.Understand the method of PPP Authentication (PAP CHAP) 7.ISDN Concepts and DDR Configuration 8.Frame Relay Concepts and Configuration 9.Introduction to Network Administration 10.Introduction to Network Administration (SNMP)
课程介绍 评价详情(0)
培训受众:
2、 对Cisco网络设备操作与管理有兴趣, 希望投入网络领域职场
3、 网络工程人员
4、 有兴趣报考
课程收益:
使用可用的配置工具完成设备初始化配置;
根据新需求,能够通过增删改等方式实现新功能;
使用命令行界面确定网络性能和状态;
根据给定的需求,实现接入层交换机配置;
使用命令行,实现VLAN、VTP、IEEEE802.1Q、ISL配置;
叙述静态和动态路由协议(RIP、OSPF、IGRP、EIGRP)的功能和操作;
使用SHOW、DEBVG命令确定路由协议的异常;
能够配置标准和扩展的访问列表;
使用命令行接口配置串行接口(PPP、HDLC)。
课程大纲
CONTENT
Module 1: Introduction to Network
Module 2: Networking Fundamentals
Module 3: Networking Media
Module 4: Cable Testing
Module 5: Cabling LANs and WANs
Module 7: Ethernet Technologies
Module 8: Ethernet Switching
Module 9: TCP/IP Protocol Suite and IP Addressing
Module 10: Routing Fundamentals and Subnets
Module 11: TCP/IP Transport and Application Layer
Part2 CONTENT
1.WAN and Router
2.Introduction to Router
3.Configure a Router
4.Introduction to CDP
5.Managing Cisco IOS software
6.Rouing protocols
7.Distance vector routing protocols.
8.Introduction to ICMP
9.Basic Router Troubleshooting
10.Access Control List
Part3 CONTENT
1.Understand the concept of VLSM
2.RIP Version 2 features and Configuration
3.Single Area OSPF Concepts and Configuration
4.4 EIGRP Concepts and Configuration
5.Troubleshooting Routing Protocols(RIP IGRP EIGRP OSPF)
6.Switching Concepts Half-duplex and Full-duplex networks
7.Switch Operation , Distinguish between collision and broadcast domain
8.Introduce LAN Design
9.Hierarchical design model
10.Switch Configuration
11.Describe the operation of the Spanning-Tree Protoco
12.The concepts and benefits of virtual LANs
13.Config VLAN
14.Troubleshooting VLANs
15.Understand the concepts and configuration VTP
16.Configuring inter-VLAN routing
Part4 CONTENT
1.Scaling Networks with NAT and PAT
2.DHCP operation and Configuration
3. Introduce WAN Technologies
4.WAN Design
5.Identify PPP operations to encapsulate WAN data on Cisco routers.
6.Understand the method of PPP Authentication (PAP CHAP)
7.ISDN Concepts and DDR Configuration
8.Frame Relay Concepts and Configuration
9.Introduction to Network Administration
10.Introduction to Network Administration (SNMP)
培训师介绍
本课程名称: CCNA
查看更多:职业素养公开课