Part 1 1: Introduction to Network 2: Networking Fundamentals 3: Networking Media 4: Cable Testing 5: Cabling LANs and WANs 6: Ethernet Technologies 7: Ethernet Switching 8: TCP/IP Protocol Suite and IP Addressing 9: Routing Fundamentals and Subnets 10: TCP/IP Transport and Application Layer Part 2 1.WAN and Router 2.Introduction to Router 3.Configure a Router 4.Introduction to CDP 5.Managing Cisco IOS software 6.Rouing protocols 7.Distance vector routing protocols. 8.Introduction to ICMP 9.Basic Router Troubleshooting 10.Access Control List Part 3 1.Understand the concept of VLSM 2.RIP Version 2 features and Configuration 3.Single Area OSPF Concepts and Configuration 4.4 EIGRP Concepts and Configuration 5.Troubleshooting Routing Protocols(RIP IGRP EIGRP OSPF) 6.Switching Concepts Half-duplex and Full-duplex networks 7.Switch Operation , Distinguish between collision and broadcast domain 8.Introduce LAN Design 9.Hierarchical design model 10.Switch Configuration 11.Describe the operation of the Spanning-Tree Protoco 12.The concepts and benefits of virtual LANs 13.Config VLAN 14.Troubleshooting VLANs 15.Understand the concepts and configuration VTP 16.Configuring inter-VLAN routing Part 4 1.Scaling Networks with NAT and PAT 2.DHCP operation and Configuration 3. Introduce WAN Technologies 4.WAN Design 5.Identify PPP operations to encapsulate WAN data on Cisco routers. 6.Understand the method of PPP Authentication (PAP CHAP) 7.ISDN Concepts and DDR Configuration 8.Frame Relay Concepts and Configuration 9.Introduction to Network Administration 10.Introduction to Network Administration (SNMP)
你实际购买的价格
付款时最多可用0淘币抵扣0元现金
购买成功后，系统会给用户帐号返回的现金券
课程介绍 评价详情(0)
培训受众:
2、 对Cisco网络设备操作与管理有兴趣, 希望投入网络领域；
3、 从事网络工程、网络维护与管理的相关工作人员；
4、 有兴趣报考
课程收益:
根据新需求，能够通过增删改等方式实现新功能；
使用命令行界面确定网络性能和状态；
根据给定的需求，实现接入层交换机配置；
使用命令行，实现VLAN、VTP、IEEEE802.1Q、ISL配置；
叙述静态和动态路由协议（RIP、OSPF、IGRP、EIGRP）的功能和操作；
使用SHOW、DEBVG命令确定路由协议的异常；
能够配置标准和扩展的访问列表；
使用命令行接口配置串行接口（PPP、HDLC）。
课程大纲
2: Networking Fundamentals
3: Networking Media
4: Cable Testing
5: Cabling LANs and WANs
6: Ethernet Technologies
7: Ethernet Switching
8: TCP/IP Protocol Suite and IP Addressing
9: Routing Fundamentals and Subnets
10: TCP/IP Transport and Application Layer
Part 2 1.WAN and Router
2.Introduction to Router
3.Configure a Router
4.Introduction to CDP
5.Managing Cisco IOS software
6.Rouing protocols
7.Distance vector routing protocols.
8.Introduction to ICMP
9.Basic Router Troubleshooting
10.Access Control List
Part 3 1.Understand the concept of VLSM
2.RIP Version 2 features and Configuration
3.Single Area OSPF Concepts and Configuration
4.4 EIGRP Concepts and Configuration
5.Troubleshooting Routing Protocols(RIP IGRP EIGRP OSPF)
6.Switching Concepts Half-duplex and Full-duplex networks
7.Switch Operation , Distinguish between collision and broadcast domain
8.Introduce LAN Design
9.Hierarchical design model
10.Switch Configuration
11.Describe the operation of the Spanning-Tree Protoco
12.The concepts and benefits of virtual LANs
13.Config VLAN
14.Troubleshooting VLANs
15.Understand the concepts and configuration VTP
16.Configuring inter-VLAN routing
Part 4 1.Scaling Networks with NAT and PAT
2.DHCP operation and Configuration
3. Introduce WAN Technologies
4.WAN Design
5.Identify PPP operations to encapsulate WAN data on Cisco routers.
6.Understand the method of PPP Authentication (PAP CHAP)
7.ISDN Concepts and DDR Configuration
8.Frame Relay Concepts and Configuration
9.Introduction to Network Administration
10.Introduction to Network Administration (SNMP)
培训师介绍
★ 精通计算机网络技术，熟练操作路由器、防火墙等网络设备，参与和实施过电信、广电、金融等行业的大型网络互联及安全估评工作，具有8年的工程实践经验。
★ 具备丰富的教学经验, 曾在国内多家大型培训中心讲授MCSE课程及网络安全类课程,精湛的专业知识和高超的培训技巧，能够让学员轻松而透彻地理解和掌握网络操作系统技术。
★ 参与编著了《网络安全与防火墙》、《操作系统安全》等书籍，两本教材均为CIW网络安全认证中国地区官方教材。
服务客户：湖北清江水电开发公司，大港油田勘探开发研究院，四川电力职业技术学院，广州诚毅公司，湖南中烟，川东北气矿等。
本课程名称： CCNA网络工程师
查看更多：其它公开课